Oil / Air Heat Exchangers Type AOCM
- Low noise level
- High performance
- Low costs
Product Description
The type AOCM oil-cooler series is designed for the return cooling of oil in hydraulic, lubricating and cooling oil circuits with air. These systems can be used for the cooling of mineral oils, synthetic oils and HFD fluids. The use of water is not possible in conjunction with rust-protection or oxygen binding agents. The maximum viscosity of the fluids to be cooled should not exceed 300 cSt.
The oil is fed through the oil-cooler, where part of its heat is absorbed by the air flowing through the heat-exchanger. The oil can be cooled down to 5°C above the ambient temperature. A further reduction of the temperature differential is not feasible on economic grounds.
Product Features
- Twin Swirl® turbolators
- Heat dissipation up to 75 kW at 40°C
- Oil throughflow up to 675 l/min
- AC motors 115 - 575 V
- DC motors 12 V, 24 V
Options:
- Bypass valve
- Replaceable air-filter cassettes
- NPT or SAE oil connections
- Steel cooling ribs
- Hydraulic motors
- Special motors